Laminated Vent Membrane XINXIA-TB20WO-E

Now the protection requirements and standards for some electronic terminal equipment products are getting higher and higher, and some intelligent electronic devices sometimes have to be used in the outdoor environment with rain and water fog, and even in the water. In order to prevent water and other liquids from entering the interior of the terminal equipment and affecting the work of the electronic equipment, it is necessary to adopt a reasonable design scheme for a good sealing design.

Shelf life is five years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80° F (27° C) and 60% RH.

All data above are typical data for the membrane raw material, for reference only, and should not be used as special data for outgoing quality control. 

All technical information and advice given here is based on XINXIA’s previous experiences and test results. XINXIA gives this information to the best of its knowledge,  but assumes  no legal responsibility. Customers are asked to check the suitability and usability in the specific application, since the performance of the product can only be judged when all necessary operating data are available.

- Waterproof: 0.1-10μm microhole, the aperture is less than 10,000 times water beads, so that water can not pass through, effectively protect sensitive parts, avoid liquid erosion, improve product life.

- Air permeability: the micropore diameter is 700 times greater than water vapor, waterproof at the same time, allowing air to pass smoothly, can effectively dissipate heat, prevent the inner wall of the product from forming fog, balance the internal and external space pressure.

- Dust-proof: The microporous channel forms a mesh three-dimensional structure in the film, and the uniform and dense distribution of micropores makes the dust encounter a barrier, achieving an effective dust-proof effect, and the minimum can capture 0.1μm particles. Protection level: IP67.