Snap in vent valve D17 W17 vent valve
PRODUCT NAME |
Snap-In Vent Plug |
PRODUCT MODEL |
AYN-Vent Plug_D17_E20WO |
PRODUCT DIAGRAM |
|
MEMBRANE MODEL |
AYN-E20WO |
APPLICATION FEILD |
Chemicals Packaging |
APPLICATION CHEMICAL |
Bleacher, Disinfectant, Amino Acid, Agrochemicals, Liquid Fertilizer |
Product Properties
PHYSICAL PROPERTIES |
TEST METHOD |
UNIT |
TYPICAL DATA |
Plug Material |
/ |
/ |
HDPE |
Plug Color |
/ |
/ |
White |
Membrane Construction |
/ |
/ |
PTFE/PO non-woven |
Membrane Surface Property |
/ |
/ |
Oleophobic & Hydrophobic |
Typical Air Flow Rate |
ASTM D737 |
ml/min @ 7KPa |
1200 |
Water Entry Pressure |
ASTM D751 |
KPa dwell 30 sec |
≥70 |
IP Grade |
IEC 60529 |
/ |
IP67/IP68 |
Moisture Vapor Transmission |
ASTM E96 |
g/m2/24h |
>5000 |
Oleophobic Grade |
AATCC 118 |
Grade |
≥7 |
Service Temperature |
IEC 60068-2-14 |
℃ |
-40℃ ~ 125℃ |
ROHS |
IEC 62321 |
/ |
Meet ROHS Requirements |
PF OA & PF OS |
US EPA 3550C & US EP A8321B |
/ |
PF OA & PF OS Free |
Application
This series of vent plug could equalize the pressure differentials of chemical containers which caused by temperature difference, altitude changes and releasing/consuming gases, in order to prevent container deformation and liquid leakage.
The vent plugs can be used in breathable cap products for chemicals packaging containers， and be suitable for High- concentration Hazardous Chemicals, Low-concentration Household Chemicals, Agricultural Chemicals and other Special Chemicals.
Shelf Life
Shelf life is two years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80 ° F (27 ° C) and 60% RH.
Note
All data above are typical data for the membrane raw material, for reference only, and should not be used as special data for outgoing quality control.
All technical information and advice given here is based on XINXIA’s previous experiences and test results. XINXIA gives this information to the best of its knowledge, but assumes no legal responsibility. Customers are asked to check the suitability and usability in the specific application, since the performance of the product can only be judged when all necessary operating data are available.
Is the waterproof vent valve a one-way valve?
Waterproof vent valve is bidirectional waterproof breathable pressure relief, not a one-way valve. Waterproof vent valve is a sealed component that is combined by eptfe film injection molding, ultrasonic welding and other forms. There are mainly threaded type, pressure type, snap type, torque type and other XINXIA ventilation valve, XINXIA ventilation valve has two important indicators: 1, air permeability 2, protection level.
